• Terminal Box ~ Used as a low profile conveying pipeline termination to divert the material flow tangentially into the top of a silo / hopper. Standard size range to accommodate 50mm to 400mm diameter pipelines.

• Dump Valves ~ used as a silo / hopper feeding valve within the conveying pipeline. Located on the silo / hopper roof it diverts the material flow into the top of a storage hopper / silo or in it's by-pass position allows the material flow to pass through to a second storage hopper / silo. Standard size to accommodate 50mm to 400 diameter pipelines.
  On any size of Pipeline, Terminal Boxes an Dump Valves are completely interchangeable.

Switch Valve ~ A range of Switch Valves is available to connect pipelines  together either in converging or diverging configurations. The most commonly used for the Power Industry is
the Dome Switch Valve using Dome Valves® to isolate the different legs.

Bends ~ size range 50mm to 400mm diameter pipelines

• Long radius mild steel pipe bends are used for non-abrasive material handling
• In abrasive applications such as Fly Ash Handling Cast Ni-hard, Grade 250 iron or basalt-lined mild steel bends are used.
• For very abrasive materials alumina ceramic-lined mild steel bends are used

Pipe ~ Standard Size range 50mm to 400mm diameter pipelines.
            Conveying Pipeline
            For most applications Clyde Bergemann Materials Handling use readily
            available, seamed mild steel pipework (BS1387; BS3601; DIN2441/8; ANSI 836.1 
            standard pipe or equivalent) to construct the straight pipe sections, typically with a
            wall thickness equivalent to 'heavyweight' or Schedule 40. For long straight sections
            the pipeline is usually constructed by welded joints using 6~12 metre random pipe
            lengths depending on availability.

            Some applications require the use of flanged connections using either 'plain' flanges 
            or  special Clyde Bergemann materials Handling'alignment flanges'. Thicker
            pipes are also used for handling very coarse and abrasive materials. These will be
            specified when required.   

Pipeline Expansion ~ Standard Size Range 50mm to 400mm diameter pipelines.

                                    Clyde Bergemann DMaterials Handling offer a range of 
                                    expansion joints for air only and conveying pipework.